Click Here to view the VIDEO
10 DAY COURSE SCHEDULE
|
••••• FOR GSA FORMS GO HERE
|
GSA Safe & Vault Technician and Inspector Certification Courses are now combined. Inspector Re-certification is still required every 3 years and is avialable either at LSI or Online
Click Here for the stand-alone in-house 3 Day Inspector Certification for experienced, working personnel.
You can now get Technician Certification or Inspector Recertification ONLINE if you qualify. Call us to get started: 866.574.8724.
For 2012 Course Schedule, Click
Here |
The General Services Administration (GSA), in conjunction with the Interagency Committee on Security Equipment (IACSE), Storage Equipment and Locking Systems (SEALS) Subcommittee, oversees the GSA courses taught at LSI. The objective of the GSA program is to establish minimum standards of training in certain areas, and to certify those students who meet those standards.
LSI is one of only 2 locations worldwide to meet the needs for GSA training and certification.
|
Course Description
The comprehensive
course will give you hands-on instruction on the
approved methods of servicing, installing, diagnosing,
troubleshooting, repairing and certifying GSA: Locks,
Vaults & Containers. You will also learn the
proper means to perform covert and forced entry
into GSA Containers.
For Inspector Certification the student will learn how to confirm if a GSA container or vault door meets the Federal Performance Specifications and can be GSA approved. The student will be instructed on the latest regulations and updates. Related topics including; inspection procedures, specification updates for GSA approved containers, vault doors and locks.
This is an ideal course
for any U.S. military, government & commercial
locksmith. Learn all the skills required to service,
maintain and inspect GSA approved security containers. |
Who Should Attend
This course was
designed for anyone who needs to know how to successfully
service, maintain, perform covert and forced entry
and repair GSA Approved Security Containers.
|
Subjects Covered
• Security
Information Program Specifications: Federal, Military,
DOE, NISPOM and DoD
• Mechanical combination locks: Installation,
servicing, combination changing and overviews of S&G 8400 Series,
S&G 8500 Series.
• Electromechanical combination locks:
Installation, servicing and combination changing
on Mas-Hamilton X-07, X-08, Kaba Mas X-09 and overviews of LKM7000
pedestrian doorlock and CDX-09.
• S&G 2740 Installation and opening, setup module function, servicing, and troubleshooting.
• Diagnostics: Extensive, hands-on diagnostics
and troubleshooting of mechanical and electromechanical
combination locks
• GSA Approved Security Containers: Operation,
service, troubleshooting and maintenance of security file
cabinets, map & plan containers, weapons containers
and vault doors
• Neutralization and repair of lockouts,
Federal Standard 809A Extensive hands-on drilling
of both Black and Red Label security
containers
• Hamilton Products Group factory tour
via video
|
Students Receive
• Mechanical Safe Lock Servicing tool kit
• Extensive 700+ page reference manual
that includes the latest specifications, regulations,
neutralization techniques, security container
identification, troubleshooting and much more.
|
Certifications &
Diplomas
• LSI and
Hamilton Products Group, Inc. Diploma
• Kaba Mas X-09 Factory Certification
• GSA Certification
• LSI Diploma |
Inspector Criteria:
Successful completion of this course requires that the student pass a written, as well as hands-on practical test on all aspects of inspecting and recertifying GSA approved security containers.
Successfully passing this course earns the GSA certification of:
"GSA Certified Inspector", which is valid for a period of three years. After the term of three years, to maintain the certification a recertification test must be taken and passed online or in person.
As a GSA Inspector, the student will be authorized to inspect and re-certify, or revoke certification, on any GSA approved container or vault door. |
|
Key Topics
• DOD Reg. 5200.1-R
Combination Lock Identification Installation
• Dialing & Changing
S&G 2937
• Overviews of:
Sargent & Greenleaf 8500
Sargent & Greenleaf 8400
• FF-L-2740A
• Mas-Hamilton X-07, X-08
• Kaba Mas X-09
• KABA Factory X-09
Certfication
• S&G 2740 Factory Certification
• Standard Form 700
• Retrofit
• Lock Installation Report
• LKM7000 FF-L-2890A
• CDX-09 Installation & Troubleshooting
• Combination Lock Diagnostics
• Safe Tools & Equipment
• Hard Plate Identification
• Safety Procedures
• Neutralization of Lockouts
• Federal Standard 809A
• Black & Red Label Containers
• Optional Form 89
• GSA Approved Containers
• Filing Cabinets AA-F-358H
• Mechanical Locks FF-L-2937
• Weapons Storage AA-C-2859
• Maps & Plans AA-F-363D
• Vault Doors AA-D-600D
• Labels (Blue,Red,Green,Black)
• Service & Troubleshooting
• Hamilton Group Video Tour
• Inspection of Containers
• Certifying Containers
• Re-Certifying GSA Approved Security Containers
• Repair of GSA Containers
• FS-809B
• Certified Technician Written Exam
• Hands-on Technician Exam
|
Looking for GSA forms?
•••• GO HERE ••••
|
|
Knowledge, Skills & Abilities
• Did you know that LSI's Professional Locksmithing, GSA Certified Safe & Vault Technician Training and Access Control Technician classes cover the Knowledge, Skills and Ability (KSA) requirements for a Grade 7 Locksmith Worker and Grade 8 and Grade 9 Locksmith in accordance with the U.S. Office of Personnel Management (OPM) Federal Wage System Job Grading Standard for Locksmithing, 4804?
• These classes also cover the Knowledge, Skills & Ability requirements for Navy Enlistment Classification (NEC) 9583, Locksmith. |
Course Information |
Course Length - Ten Days
Course Number - LSI 130
Course Credit - 4
Tuition - $2,750
College Credit for additional Fee- $260. Optional
One Time Enrollment Fee - $100.
Download Enrollment Form, Click
Here
For Refund Policy, Click
Here
For more information, email or call 866-574-8724
|
|
|
